• Introduction
• About Us
• Contact Us
• Pipe & Jointing Techniques
• Floor Systems
• Manifolds
• Standard Control Systems
• REHAU intelligent Control System
• Underfloor Heating Design
• Hot laying installation method
• System Accreditation
• REHAU System Warranties
• Examples of underfloor heating installations

REHAU supply two types of manifolds:

• Standard manifolds.

• Flow meter manifolds.

Both manifolds are available for 2 - 12 underfloor heating circuits and are supplied fully assembled with galvanised fixing brackets. Each manifold with 1" flow / return headers are produced as a single unit from high quality brass (Ms63/CW508L). The connections on the flow header (identified by the red label "supply") should be off set to the connections on the return header, this allows for easy installation.

Standard Manifold

• The flow valves for the thermal actuators are on the return header (identified by the blue label "return").

• The combination flow and balancing valves are located on the flow header (identified by the red label "supply").

• To adjust the balancing valve, please use the key provided.

• The manifolds are fully compliant to BS 1264 - 4.

Flow Meter Manifold

• The flow meters are on the flow header (identified by the red label "supply").

• The thermal actuators fit onto the combination flow and balancing valves, which are located on the return header (identified by the blue label "return").

• To adjust the balancing valve, please use the key provided.

• They feature quick stop isolating valves for each circuit as required by BS 1264 - 4.

Section 3_Manifolds 1194 kb